Lifestyle

8 Maintenance Tips to Remember for your Home Security System

Just like maintaining your car through routine vehicle check-ups, your home security system also needs the same attention. When it comes to protecting your family, regular maintenance is recommended and for a good reason.

Checking your home security system is advised by experts worldwide due to three reasons. For one, you will be able to identify system glitches. This means your home security system’s performance is topnotch, just like the day you first installed it.

Secondly, regular maintenance means you’re avoiding false alarms. We all know how false alarms could be a waste of not only your time but also the emergency respondents and authorities’. Outdated equipment can lead to this.

Last but not least, checking your home security system regularly will prevent cyber hacks from conniving criminals. With these in mind, make sure to inspect your home’s security system from time to time. If you don’t know where to begin, here are eight to give you a head start.

  1. Change Batteries Regularly

When something, as essential as your mobile phone, needs regular charging, something as life-saving (or threatening) as your home security system also needs batteries working like clockwork.

The last thing you want is for your nanny camera to stop recording due to battery failure. That said, make sure that you change the batteries once every couple of years. Depending on the battery’s lifespan, you’d have to adhere to strict maintenance to avoid mishaps.

Motion sensor batteries, for example, may last three to five years. However, the more modern pieces of equipment may last up to seven years. But if you want peace of mind every night, you can always create a general rule to change the batteries every two to three years.

  1. Check All Cameras

The only eyes in your home when you’re not around are the cameras that come with your home security system. So it’s just right that you give the cameras the attention they so rightly deserve.

Make it a point to check every camera installed in your home. See if they’re aimed properly, otherwise adjust if necessary. Moreover, check if they’re still working by inspecting the recording devices.

  1. Update Software on All home Security Devices

Your home security devices can be easily hacked if you don’t do regular software updates. Always make sure to update software from these devices:

  • Smart locks
  • Smart lights
  • Smart cameras
  • Smart thermostat

That way, you can be sure you’re ahead of those hackers lurking in your neighborhood.

  1. Inspect Outdoor Security Lights

What good is an expensive home security system if the lights don’t work? Burglars typically strike at night and your smart lights could shoot them away because they can be easily seen. That said, check every smart lighting installed on your entryways, driveways, or backyard.

Next is to check if the lights are properly aimed at the right spot where people commonly tread through. If not, always adjust and keep it laser-focused on the right areas.

  1. Perform Control Panel Test

Your control panel acts as the brain of your entire home security system. It’s recommended to check if it’s still as robust as the first day you acquired it. Typically, control panels run a self-diagnostic through a “test mode” system. This is to ensure that it’s working seamlessly.

Before running the test, notify the emergency services and police so they don’t come knocking on your front door while you’re performing the control panel test.

  1. Check Sensors on Doors And Windows

It’s recommended to perform weekly perimeter checks. Go around the entire house and check every sensor installed on all doors and windows. Inspect if the adhesives holding the sensors are still keeping them in place, otherwise, call the experts or fix it yourself.

  1. Clean All Security Devices

Dust buildup can possibly prevent your sensors from working. That’s why it’s essential to conduct regular cleaning and wiping every once in a while. However, try to steer clear from detergents or cleaning solvents as these harsh chemicals may also damage the sensor. More importantly, prevent water from seeping through your home security devices. Wipe them clean with a damp cloth to ensure no dust accumulation will deter it from doing its job.

  1. Call in the Experts

When all else fails, call in the experts so they can conduct regular maintenance checks. There might be subtle signs that you won’t notice which only the professionals can. That said, make sure you consult their expert opinions on whether or not your home security devices are flawlessly working.

Author Bio

Eliza Brooks loves to write about home improvement, interior designs, and more. She is currently working with EyeSpySupply, which offers a wide range of spy equipment and surveillance gear, including spy camera with audio, voice recorders, nanny camera, gps trackers, and more

About the author

Guest User

Subscribe to Blog via Email

Join the list of our 16,000+ subscribers who receive our latest articles, tips/tricks & contest details directly to their inbox. For Free.